• Pack
  • 2 dispo sur shop.distrimodel.com

ESU Loksound V5 NEM660 21MTC for CC72000 diesel locomotive Jouef Loisirs

ESU58419-72000-JL
Rating 

For CC72000 Jouef Loisirs diesel locomotive with 21MTC connector

 

 

Expédition

 

 

Retours et retractation

Description

Attention to choose the decoder that suits you, please read the description below!

ESU Loksound V5.0 NEM-660 (21MTC) sound decoder with Distrimodel sounds for CC72000 Jouef Loisirs diesel locomotive.
The functions have been reorganized and some have been added.

This decoder is suitable for locomotives equipped with an original board.
This decoder is not suitable for locomotives equipped with an MPPE/DMPE board or Hornby Jouef locomotives

The LokSound 5 is the largest member of the LokSound family. By combining the digital decoder and sound module on a printed circuit board, we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore, it fits into almost all H0 or 0 locomotives.

LokSound 5 decoders are available with all common interface types and are supplied with a sugar speaker (11mm x 15mm) and a soundproof enclosure.

Operating modes

Like all products in the LokSound family, the LokSound 5 is a true multi-protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course, it supports 14 to 128 speed steps, as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Using RailComPlus®, decoders automatically register at appropriate control stations.

This decoder supports all DCC programming modes and, thanks to RailCom®, you can read CV values on the main station, provided you have a control station that supports RailCom®. There are utility registers for command stations that only facilitate programming CVs ranging from 1 to 255.

Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses make it easy to trigger 16 functions. An integrated programming mode even allows programming with the good old Central Unit 6021.

The M4 protocol supports automatic recording on mfx® compatible headunits.

The LokSound 5 decoder supports Märklin® brake sections as well as ZIMO® HLU brake controls or the Lenz® ABC system. Braking with DCC or DC brake generators is also possible. Additionally, the locomotive with LokSound stops when a Selectrix® brake diode is switched in the circuit. The ABC push-pull function allows automatic switching between two stations.

The LokSound 5 decoder is also suitable for analog DC and AC configurations (!).

Sound

The LokSound 5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 bits / 31250 kHz. So we have finally achieved hi-fi sound quality on your network. For all practical purposes, no difference from the original can be detected. A Class D audio power amplifier with an output power of up to 3 W powers speakers with a permissible impedance of 4 to 32 Ohms. The enormous sound memory of 128 Mbps guarantees sufficient storage capacity.

The volume of each sound fragment can be adjusted separately. The extremely flexible sound engine, without a rigid flowchart, makes it easy to simulate every imaginable railway vehicle. Three separately adjustable braking functions and two alternative charging scenarios give you maximum control of your vehicles.

Functions

We understand that you want your locomotives to be as realistic as possible. Therefore, we have collected many function outputs. Depending on the type of interface, each LokSound 5 has at least 10 amplified outputs. Decoders with PluX22 or 21MTC interface have 4 additional outputs for controlling servos or as logic outputs. Of course, all important lighting functions are supported. The brightness of each output can be adjusted separately. The decoder supports automatic push and pull movements - known as coupler waltz - necessary for the reliable operation of digital couplers such as those from ROCO® and Krois® as well as Telex® couplers.

Motor control

The motor control of LokSound 5 has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz ensures completely quiet operation, especially for coreless motors. So the typical buzzing sound is a thing of the past. Load control can now be adjusted with up to 10 separate HPs and thus handle even the most difficult cases. The unique “Auto Tune” function makes it easy to automatically calibrate the decoder to perfectly match the engine. The LokSound 5 decoder provides up to 1.5 A of motor current, which is quite sufficient even for older motor types.

THE + DISTRIMODEL: 

To guarantee you full satisfaction with your investment, Distrimodel offers you a free reload of the sound range in the event of incorrect handling during the installation or programming of your decoder. To err is human and a handling error is always possible...

Product Details
ESU58419-72000-JL

Data sheet

Scale
HO (1/87)
Power
Digital DCC
Speaker
Yes
type of connection
21MTC
Auxiliary outputs
6
Operating electric current (A)
1,5 A
Reviews

No customer reviews for the moment.

Write your review

ESU Loksound V5 NEM660 21MTC for CC72000 diesel locomotive Jouef Loisirs

ESU Loksound V5 NEM660 21MTC for CC72000 diesel locomotive Jouef Loisirs

For CC72000 Jouef Loisirs diesel locomotive with 21MTC connector

Write your review
16 other products in the same category:

Reference: MS440C-72100

Brand: Distrimodel

ZIMO MS440C 21MTC for CC72100 SNCF diesel locomotive

Review(s): 0

For CC72100 SNCF diesel locomotive

Reference: MS440C-68000

Brand: Distrimodel

ZIMO MS440C 21MTC for A1AA1A 68000 SNCF diesel locomotive

Review(s): 0

For A1AA1A 68000 SNCF diesel locomotive

Reference: MS440C-RAM

Brand: Distrimodel

ZIMO MS440C 21MTC for RAm TEE/DE IV NS/CFF diesel railcar

Review(s): 0

For RAm TEE / DE IV NS/CFF diesel railcar

Reference: MS440C-72000

Brand: Distrimodel

ZIMO MS440C 21MTC for CC72000 SNCF

Review(s): 0

For CC72000 SNCF diesel locomotive

Reference: ESU58419-75000-DMPE

Brand: Distrimodel

ESU Loksound V5 NEM660 21MTC for BB75000 diesel locomotive OsKar MPPE/DMPE

Review(s): 0

For BB75000 OsKar diesel locomotive with 21MTC connector MPPE/DMPE board

Reference: MS440C-75000

Brand: Distrimodel

ZIMO MS440C 21MTC Distrimodel for Prima diesel locomotive BB75000/75100

Review(s): 0

For OsKar Prima BB75000/75100 diesel locomotive

Reference: MS440C-63000

Brand: Distrimodel

ZIMO MS440C 21MTC for BB63000 SNCF

Review(s): 0

For BB63000 SNCF diesel locomotive

Reference: MS440C-X3600

Brand: Distrimodel

ZIMO MS440C 21MTC for X3600 ABJ4 SNCF diesel railcar

Review(s): 0

For X3600 ABJ4 SNCF diesel railcar

Reference: MS440C-67400

Brand: Distrimodel

ZIMO MS440C 21MTC for BB67400 SNCF

Review(s): 0

For BB67400 SNCF diesel locomotive

Reference: MS440C-REEKS60

Brand: Distrimodel

ZIMO MS440C 21MTC for Class 60 SNCB diesel locomotive

Review(s): 0

For Class 60 SNCB diesel locomotive

Reference: ESU58419-62000-MABAR-V1

Brand: Distrimodel

ESU Loksound V5 NEM660 21MTC for A1AA1A 62000 diesel locomotive Mabar V1

Review(s): 0

For A1AA1A Mabar diesel locomotive with 21MTC connector

Reference: ESU58419-040DA-MABAR

Brand: Distrimodel

ESU Loksound V5 NEM660 21MTC for 040DA diesel locomotive Mabar

Review(s): 0

For 040DA Mabar diesel locomotive with 21MTC connector

Reference: MS440C-X2800

Brand: Distrimodel

ZIMO MS440C 21MTC for X2800 SNCF diesel railcar

Review(s): 0

For X2800 SNCF diesel railcar

Reference: MS440C-68500

Brand: Distrimodel

ZIMO MS440C 21MTC for A1AA1A 68500 SNCF diesel locomotive

Review(s): 0

For A1AA1A 68500 SNCF diesel locomotive

Reference: MS440C-63500

Brand: Distrimodel

ZIMO MS440C 21MTC for BB63500 SNCF

Review(s): 0

For BB63500 SNCF diesel locomotive

Reference: ESU58419-62000-MABAR-V2

Brand: Distrimodel

ESU Loksound V5 NEM660 21MTC for A1AA1A 62000 diesel locomotive Mabar V2

Review(s): 0

For A1AA1A 62000 Mabar diesel locomotive with 21MTC connector