Digitization board NEM 652 8 broches for BB Jacquemin Roco

Printed circuit board with DCC NEM 652 socket (8 pins) and 4 independent function lighting to replace the original printed circuits without DCC socket or with 2 function lighting.
Board for BB Jacquemin Roco having the first chassis equipped with a motor with 1 single flywheel.
If your chassis is equipped with a motor with two flywheels, we recommend installing the MPPE2254 plate.

Warning: The installation of a 4 function decoder is mandatory in certain cases.

This plate allows you to control the lights independently with 4 functions in digital mode.
We recommend using the MPEL101K LED lighting kit.

Complete instructions illustrated with many color photos.

Please note that when using an MPPE board, it is essential to program the decoder to access the lights control functions independently. As this task is quite tedious with most control units, we offer decoders, whether sound or not, pre-programmed and ready to use.
To do this, remember to choose the "MPPE Programming" option located at the bottom of the description of the chosen item in the "Digital / Decoders" or "Digital / Preprogrammed Decoders" section or a MPPExxx reference of sound decoder in the "Digital / Sound Decoders" or "Digital / Programmed Sound Decoders" section

Similar to the old production of Miniatures Passion under the reference MPPE401