Digitization board NEM 658 PluX 22 for BB Jacquemin Roco

Printed circuit with DCC socket NEM 658 PluX22, 8 independent functions to equip the BB Jacquemin Roco (BB9200/9300/16000/25100/25200).

Attention: these boards are only mounted on low chassis with a motor with 2 flywheels, for chassis with a motor with 1 flywheel please use the MPPE401-08 board.

Sizes 86 x 26.8 mm.
This board equipped with a PluX22 decoder allows to have 8 functions (F0F, F0R, AUX1, AUX2, AUX3, AUX4, AUX5, AUX6).
You can control the lights independently with 4 functions (F0F, F0R, AUX1, AUX2).
You have 4 functions left (AUX3, AUX4, AUX5, AUX6), 2 at each end to control other lights or accessories, see the list below.

• cabin lighting
• 3rd lights
• electric uncoupler
• smoke bomb
• fan
• etc...

To better understand the NEM658 standard aka PluX, we invite you to download the PDF available opposite.

Complete instructions illustrated with numerous color photos.

Be careful when using an MPPE board, it is imperative to program the decoder to have access to the functions of controlling the lights independently. As this task is quite tedious with most control units, we offer decoders, sound or not, preprogrammed, ready to use.
To do this, remember to choose the "MPPE Programming" option located at the bottom of the description of the chosen item in the "Digital / Decoders" or "Digital / Preprogrammed Decoders" section or a MPPExxx reference of sound decoder in the "Digital / Sound Decoders" or "Digital / Programmed Sound Decoders" section

This range of products received the 2017 New Technologies Model of the Year diploma from the FFMF

Similar to the old production of Miniatures Passion under the reference MPPE454 or MPPE454-22