- 2 en stock chez Distrimodel, contactez votre revendeur
- 8 dispo sur shop.distrimodel.com
ZIMO programming board
Expédition
Retours et retractation
Zimo programming, sound loading and update board
This board only works when connected to a computer via USB.
It allows for decoder updates and programming (read/write, on POM or service track).
Equipped with its own PluX, 21MTC, 6-pin, Next18, and E24 connectors, it does not require the MSTAP board to connect decoders.
Without a separate power supply, it is powered by the 5V from the USB cable.
Included accessories: SUSI ZIMO cable, ZPP and ZSP software, and downloadable manuals.
Reference: USBCKAB
Brand: ZIMO ELEKTRONIK GmbH
USB-C wire for ZIMO programming board
Reference: MS950P
Brand: ZIMO ELEKTRONIK GmbH
with 34-pin interface for large scales (O, LGB, 1, G, etc.)
Reference: ADAPLU50
Brand: ZIMO ELEKTRONIK GmbH
to equip machines without connectors with a PluX-22 connector
Reference: MX820E
Brand: ZIMO ELEKTRONIK GmbH
to control 1 single turnout
Reference: MX820D
Brand: ZIMO ELEKTRONIK GmbH
to control 1 single turnout
Reference: MS950K
Brand: ZIMO ELEKTRONIK GmbH
with 34-pin interface for large scales (O, LGB, 1, G, etc.)
Reference: ESU12619-PRIMA-EL
Brand: ESU
PluX22 for Prima electric Os.Kar
Reference: ESU12618-PRIMA-DE
Brand: ESU
PluX22 for Prima diesel Os.Kar
Reference: ESU12418_DM75000
Brand: ESU
PluX22 for BB 75000/75100/75300 FRET traffic
Reference: MX820Z
Brand: ZIMO ELEKTRONIK GmbH
o control 16 outputs other than turnout
Reference: FS850P22
Brand: ZIMO ELEKTRONIK GmbH
with PluX22 connector according to NEM658
Reference: ESU12419_DMPRIMA-EL
Brand: ESU
PluX 22 for electric Prima OsKar
Reference: MX821S
Brand: ZIMO ELEKTRONIK GmbH
to drive 8 servo motors
Reference: MX820Y
Brand: ZIMO ELEKTRONIK GmbH
to control 1 double turnout
ZIMO programming board